Infinix Hot 3 LTE hard reset

<

Infinix Hot 3 LTE hard reset and Infinix Hot 3 LTE soft reset

Infinix phone crashes, reboots, freeze, or cannot be powered on, or some third-party software is not compatible with your phone. Reset the phone to factory status. Uninstall the software that may cause the problem. Upgrade the phone software. See instructions below.

Infinix Hot 3 LTE mobile phone is frozen, can’t power on or you have forgotten your phone lock passwordRemove your battery, remove your SIM card then reinstall them to power on again, if still does not work

  1. Turn off the phone completely.
  2. Press and hold both Volume UP + power on the phone. After the screen lithing up and Infinix LOGO shows on the screen release the power but keep press the Volume UP until the Andorid robot appears with “No command”
  3. To display the recovery menu press the lower left key on the front panel.
  4. When Android Recovery menu screen shows up do the following
  5. Navigate and highlight “wipe data / factory reset” using the Volume down key and press power to confirm.
  6. Navigate and highlight again to Yes — delete all data and press power.
  7. All data will be lost! Before doing a hard reset backup all important data. Reboot system now. Press power to reboot the phone.

Another solution to get your Infinix device working again or to access it is to reinstall its firmware.

It is important to obtain the correct upgrade file/firmware¬† for your particular model of Infinix phone. The most common way to get your device’s software is to download from the manufacture’s website, but not every manufacture publish these files. Your other chance to get the firmware is to find it on the internet. There are a few websites, where you can get yours.

  1. Download your Infinix Hot 3 LTE firmware than copy it to your SD card and name the file to update.zip. (If you have only internal storage, than copy it to that folder on the phone. usually /sdcard)
  2. Turn off the phone completely.
  3. Press and hold both Volume UP + power on the phone. After the screen lights up and Infinix LOGO shows on the screen release the power but keep press the Volume UP until the Andorid robot appears with “No command”
  4. To display the recovery menu press the MENU the lower left key on the front panel.
  5. Using the volume key highlight apply update from SD card.
  6. Press power to reflash the software.
See also  Amazon Kindle hard reset

Troubleshooting – some general problem and solution

Leave a Reply